Tech Sleeve Hard

Tech Sleeve Hard is built using unique high quality materials that enables it to outperform any sleeve in the market in terms of:
✓ Durability
✓ Consistency
✓ Dimensional Stability

Request Offer

Flexible and expandable inner layer

Flexible and expandable innermost core. (1 mm)
Contains Dyneema® that offers maximum strength with minimum weight.
Dyneema® doesn’t fray and is up to 40% stronger than aramid fibers such as Kevlar®.
Prevents slipping of the sleeve on the mandrel.
Extremely durable and resistant to moisture, UV light and chemicals.

Compressible foam layer

1 mm – Compressible pre-compressed Foam Layer.
The compressible pre-compressed Foam Layer has high rebound resilience and is up to 50% compressible without bulging.
Resistant to permanent deformation, good abrasion resistance, resistance to aging, weathering and cleaning solvents used for polymer plate cleaning.

Tech core material in various thicknesses

Stitch, Bonded and Compressed Tech Core Material in various thicknesses.
Contains a filament fiber base which is volumized by fiberglass infused with Epoxy Vinyl-Ester-Resin.
Light weight with extreme high flexural strength and form stability.

Chemical resistant outer surface layer

The 2,5 mm outer surface layer contains Epoxy Vinyl-Ester-Resin reinforced with technical filaments and polyester fleece.
The optimized thickness of the outer surface increases stiffness and forms stability over time
High chemical and temperature resistance with excellent tape mount and demount properties.

Technical Specifications

Features and Options

Hard sealed edges

Protects the core from damage by ink and solvents. Ensures the longevity of the sleeve.

Rubber sealed edges

Decreases wear and tear of the sleeve while increases durability. The edges are shock absorbent, therefore the chances of impact damage on the side of the sleeve are reduced.

inner metal ring including registration slot

Inner metal ring incl. registration slot

Most strong and durable slot solution. The diameter of the metal ring is slightly wider than the core, to ensure easy mounting and prevent the damage of the mandrel.